Bobcat of Lansing

Information

2023 DownEaster Scissor Hoist Dump Bodies DEDS1096

Features may include:

• 10 gauge construction throughout

• Dirt shedding , sloped design at side plate and tailgate top

• Double panel side plates equal over 1/4" thickness.

• Full depth 3/16"rear corner pillars incorporate recessed lighting, keyhole banjo eyes and lower tailgate pin receiver.

• All lighting is LED rubber mounted and NTEA and Federal compliant.

• 2 1/2" shorter deck height (9' only)

• Mounting height of 9.5" chassis to floor (9' only)

• Self aligning rear latch release for the top gate pins

• Integrated tarp hooks

• DuPont™ Imron® Elite black oven cured paint w/ epoxy primer

• 4" x 5.7# Channel long sills and 3" channel cross members (9')

• 6" x 8.2# Channel long sills (10', 10.5' 11')

• 3/16" Stainless formed 7" long sills (SS body)

• 3" stainless tubing, interlaced cross members (SS body)

• Two piece 10 gauge floor with 45 degree slopped corners where meets seamless side plate.

• Greasable Bronze bearings for underbody release mechanisms

• Formed 10 gauge inner, outer and end panels.

• 1" hardened pins, (1" Stainless) with plasma cut latch receiving lock fingers

• Adjustable 1/4" chain for spreading aggregate material & holding gate in down position

• 12" (1/4 cab) overhang, standard. (8', 9', & 11')

• Pre punched tarp mounting provisions.

• Slotted dual windows