Bobcat® of Lansing

Information

2023 DownEaster XD Series Medium Duty Dump Body DED1096-HD

Features may include:

• ATSM 572 Grade 50 High Tensile steel (65ksi) inside of body

• 10GA Grade 50 front panel with integral stiffener

• Double panel side plates equal over 5/16" thickness.

• 10 gauge outer side panels material & holding gate in down position.

• Full depth 3/16" rear corner pillars incorporate recessed lighting, keyhole banjo eyes and lower tailgate pin receiver.

• Dirt shedding , sloped design at side plate and tailgate top

• 10" board extension pockets

• Class 40 (single cylinder), 50 & 70 hoists available (dual cylinders)

• Epoxy primer with Phosphate prewash

• Mounting hardware and brackets provided

• All lighting is LED rubber mounted and NTEA and Federal compliant.

• DuPont™ Imron® Elite black oven cured paint w/ epoxy primer

• 3/16" Grade 50 floor w/ radius corners & single weld seam

• 10", 3/16" formed long sills w/ interlaced cross members

• 4" x 5.7# Channel cross members w/ formed - 3/16" cross members over hoist

• Greasable Bronze bearings for underbody release mechanisms

• Front handle tailgate release, standard

• Mounted & painted Sub frame for ease of installation

• Dual safety props

• Formed 3/16" grade 50 inner panel, 10GA outer and end panels

• 1 1/4" lower lock pins, with forged latch receiving lock fingers.

• Adjustable 5/16" chain for spreading aggregate

• Integrated tarp hooks

• 1.50" dia. 4140 hinge pins